P位/POSITION

2^ndinjection unit horizontal and parallel to zhe first

Shortest center space of mould is 200mm

L位/POSITION

2^ndinjection unit horizontal on the back of machine

Ideal for larger shot weight

V位/POSITION

2^nd injection unit at vertical angle of the mould

Ideal for smaller shot weight and space-saving

W位/POSITION

2^nd injection unit at 45°angle above the horizontal unit

Ideal for smaller shot weight, space-saving, lower height required

M位/POSITION

2^nd injection unit in the back of moving platen

Ideal for injection molding of large parts,Swivel platen shares mould weight equally

TTURNTABLE TECHNOLOGY

Two component parts (two stations in the mould), the perform is moved to the 2nd injection position by a 180°rotation through high precision turntable. In the case of three or four components (three or four stations), the angle of rotation is 120°or 90°.

SSWIVEL PLATENTECHNOLOGY

The swivel platen is installed on the vertical axis of the machine, between the fixed platen and the moving platen. The preform is moved by rotating the vertical centeral axis of the swivel platen. It is available with DP two platen clamping structure, which is especially suitable forlarge-scale multi-components injection molding. The swivel platen shares the weight of the mould and effectively reduce the clamping force requirements of the part, so that customers can choose smaller tonnage injection molding machines,

IINDEX PLATE

The center of the moving platen is equipped with a rotating structure that can rotate 180°, which drives the mould to axial motion and moves the prelorm to the 2nd station.

BBI-INJECTION

Bi-njection is the injection of the same raw materials of two colors into the cavity through two independent gates. No accurate parting line on the product.

CCORE BACK

In the core back process, the programmable core puller is used to control the movement of the mould slider to inject the 2nd component. There is regular parting line on the product.

MMARBLING /SANDWICH

On the basis of the structure of the traditional injection molding machine, a group of composite nozzles and an independent plasticizing unit are added. During the injection molding process, the valve core can be controlled to achieve the function of marbling or sandwich injection molding,Available with special separating head to form special pattern. Also Available to run as single component machine.

01

HIGH SPEED AND PRECISION TURNTABLE

The high-precision turntable is controlled by servo motor, which is fast and stable with high load intensity. The controller monitors the turntable position deviation in real time through the rotary encoder

LARGE SPACE FOR MOULD

Super wide tie bar design, suitable for more mould types, therebyreducing procurement costs

02

PATENTED TURNTABLE STOPPER

Completely keep turntable from dropping.Adopted integrated base, simplified structure and higher reliability

03

SLIDING FOOT

Lengthened and widened sliding foot ofmoving platen optimizes platen parallelism even with heavy mould

04

HIGH PRECISION LINEAR GUIDE ON INJECTION UNIT

Injection and plasticizing syster adopts linear guide with high precision.high rigidity and low coefficient of friction 

05

UNIQUE EJECTION STRUCTURE (OPTIONAL)

Able to work as single component machine with 3 ejection cylinders design

06

HIGH EFFICIENT HYDRAULIC SYSTEM

Equipped with independent hydraulic servo system. Reasonable oil circuit layout and low pressure loss 

07

FLEXIBLE COMBINATIONS OF MULTI-COMPONENTS

Meets customized needs of parts in diversilication and individuation